Both CNC mortiser editions US$3,499. Freight, duty and taxes are extra.

Españolالعربية

SwivdorCNC MORTISERS
Excerpts from one job on a metal door, cut with the trim router edition. No sound.

Cut lock mortises in aluminium and iron doors

Portable CNC for metal doors. With the right cutter, it runs from a battery trim router.

What you see in the video

  1. The cutter follows the program along the outline of the lock recess.
  2. It works through the metal in the door edge while the machine stays clamped.
  3. The finished recess and screw holes are shown at the end.

Before you cut a metal door

  • Find out the metal and its wall thickness. Aluminium and iron need different cutters and settings.
  • Check what is inside the door: reinforcement, foam, wiring or fire-rated construction. Do not alter a fire-rated door unless it is permitted.
  • Run a test piece first, protect the finish, and wear eye and hearing protection. Metal chips are sharp and hot.

Precise

The program controls the position, shape and depth of every cut.

Reusable

Save the job once, then run the same template again and again.

Beginner-friendly

No steady hand needed. Beginners can cut well too: mark, clamp and press start.

Ready for batches

Use one template for door after door, or part after part.

WhatsApp