2. Choosing Cutters
Guide 2 of 3
To choose a lock mortise cutter, start with the lock: the cutter decides how deep you can go and how small the detail can be.
Depth
The machine cuts up to 150 mm deep. The cutter may allow less, so measure your deepest pocket first.
Width and corners
A cutter cannot make a slot narrower than itself or an inside corner tighter than its radius. Note your narrowest slot and smallest hole.
Material
With a suitable drill bit or cutter, the machine can cut wood, aluminium, iron, steel and acrylic. Each needs its own tooling and settings. Send the material and thickness, and run a test piece first.
Collet
The shank must match the collet. Send your router model if you use the trim router edition.