Both CNC mortiser editions US$3,499. Freight, duty and taxes are extra.

Españolالعربية

SwivdorCNC MORTISERS
Excerpts from one job: set up a circle, cut it, check the plate. No sound. The controller screen in the video is in Chinese.

Fix it on a flat surface. Cut a circle in steel.

No door needed. In this job the portable CNC is clamped to a board to modify a steel plate.

How this job works

  1. Screw or clamp the plate to a flat board, then clamp the machine so neither can move.
  2. Choose the circle on the touchscreen and enter its size, depth and the cutter size.
  3. Press start. The machine follows the circle, a little deeper on each pass.

Use it for your own work

The same setup suits holes and openings in lock plates, brackets and other small flat parts, when they can be held securely and are within reach.

Use a cutter made for the metal and run a test piece first. Wear eye protection, and keep hands and loose sleeves away from the cutter and the chips.

Change the cutter. Change the material.

  • Wood
  • Aluminium
  • Iron
  • Steel
  • Acrylic

Use the right drill bit or cutter for each material. Speed and depth per pass depend on the material, its thickness and the edition, so run a test piece first.

WhatsApp